Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The barb is 1/4″ OD. (Note: if you are using an aeration pump, we recommend a “deep water” type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort)

316 Stainless
1/2″ diameter. Stone is 1″ in length. Overall length is 1 7/8″

Sanitizing your Diffusion / Carb Stone:

To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the stone for 1-3 minutes to help break down anything within it.

If boiling is not an option, we recommend soaking in Star San, which will remove a majority of surface contamination/bacteria, but will not sanitize the interior of the stone which may or may not be contaminated.