Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 600gs of hops and saw full flow through the pump. This is very effective.
Bespoke 3.2 kWh concealed conical heating element. Make
the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s
not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too.
Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution.
Bottom drain below the false bottom means minimal dead space.
High temperature, high flow rate, food-grade pump. With an 8L per minute flow rate, you can transfer your brew efficiently and safely.
Heavy duty handles on the outside of the G70 unit.
Convenient side entry recirculation. Rather than up and over, the G70 has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler.
New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70 is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger.
Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open.
Automatic heat sensors and safety cut-out for dry boil protection.
Colour LCD controller screen with magnetic mounting for easy viewing from all angles and manual control.
Glass lid with handle.
Ball valve for sampling/draining.
This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time.
Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit.
The large size means it needs to be positioned away from the G70, however this is made easy with longer silicone tubing attached as standard.
Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket.
Large dual-stage hop filter
provides a large surface area to allow for a hopping rate of up to 1.5kg, which also reduces pump load and blockages.
Robust stainless steel body
and excellent build quality.
The Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfathers come with a 3 year warranty. Grainfathers purchased directly from the Grainfather website also come with a 30 day satisfaction guarantee. This means, if you are not fully satisfied with the Grainfather you are welcome to return it within 30 days for a full refund.